Overwatch 2 Color aimbot & triggerbot with interception driver

atohidan' Alıntı:

It's set for RED ENEMY COLOR, not MAGENTA​

Instructions
1. Copy The Code down below and make it into a .ahk file
2. Get AutoHotInterception from This

Bağlantıları görmek için lütfen Giriş Yap

3. Also Get The interception Driver from this

Bağlantıları görmek için lütfen Giriş Yap

4. Install Interception with command line installer
5. Unpack AutoHotInterception
6. Place the ahk from step one into the folder where AutoHotInterception is unpacked
7. place The interception lib from Interception\library to AutoHotInterception\Lib
8. Restart your PC

Here is a Tutorial for the People That don't get it


For People getting Any errors Delete your config.ini and

if you are on laptop

Start the monitor.ahk in the main folder and then on right begin to tick one bock at a time to see which mouse is yours if you ticked on and the pressed buttons to appear in the below output box use that number here

AutoHotkey:

AHI.SendMouseMove(11, MoveX * MoveMultipler, MoveY * MoveMultipler) ; where it says 11 update it

AutoHotkey:

[LIST=1]
[*]#Persistent
[*]    #KeyHistory, 0
[*]    #NoEnv
[*]    #HotKeyInterval 1
[*]    #MaxHotkeysPerInterval 127
[*]    #InstallKeybdHook
[*]    #UseHook
[*]    #SingleInstance, Force
[*]    #Persistent ; (Interception hotkeys do not stop AHK from exiting, so use this)
[*]    #include Lib\AutoHotInterception.ahk
[*]    global AHI := new AutoHotInterception()
[*]   
[*]    SetKeyDelay,-1, 8
[*]    SetControlDelay, -1
[*]    SetMouseDelay, -1
[*]    SetWinDelay,-1
[*]    SendMode, InputThenPlay
[*]    SetBatchLines,-1
[*]    ListLines, Off
[*]    CoordMode, Pixel, Screen, RGB
[*]    CoordMode, Mouse, Screen
[*]    PID := DllCall("GetCurrentProcessId")
[*]    Process, Priority, %PID%, High 
[*]   
[*]    ZeroX := (A_ScreenWidth // 2)
[*]    ZeroY := (A_ScreenHeight // 2)
[*]  
[*]    if (FileExist("config.ini"))
[*]    {
[*]    }
[*]    Else
[*]    {
[*]  
[*]    IniWrite, 38, config.ini, main, ColVn
[*]    IniWrite, 45, config.ini, main, CFovX
[*]    IniWrite, 45, config.ini, main, CFovY
[*]    IniWrite, 3, config.ini, main, CSmoothX
[*]    IniWrite, 3, config.ini, main, CSmoothY
[*]    IniWrite, 3.5, config.ini, main, Ingamesensitivity
[*]    IniWrite, 0.15, config.ini, main, BustSpeed
[*]    }
[*]   
[*]    IniRead, ColVn, config.ini, main, ColVn
[*]    IniRead, CFovX, config.ini, main, CFovX
[*]    IniRead, CFovY, config.ini, main, CFovY
[*]    IniRead, CSmoothX, config.ini, main, CSmoothX
[*]    IniRead, CSmoothY, config.ini, main, CSmoothY
[*]    IniRead, Ingamesensitivity, config.ini, main, Ingamesensitivity
[*]    IniRead, BustSpeed, config.ini, main, BustSpeed
[*]  
[*]    EMCol := "0xab0001, 0xb7394f, 0xb93742, 0xbb3340, 0xca4c5a, 0xbf3f4c, 0xd0262e, 0xd1262e, 0xd22830, 0xb0535f, 0xd1272e, 0xc13542, 0xca3d49, 0xc33541, 0xbb2e3a, 0xcc414d, 0xcc414d, 0xcb404c, 0xc23642, 0xbe303d, 0xcc404d, 0xcd4150, 0xd50f0e, 0xd50f0e, 0xd50f0e, 0xd50f0d, 0xd40f0e, 0xd50f0d, 0xd5100d, 0xd5100e, 0xd50f0d, 0xd00b0a, 0xcf4551, 0xcd414f, 0xc83c48, 0xc23642, 0xc93e4c, 0xd74c5b, 0xda505d, 0xcc404f, 0xc15353, 0xd521cd,0xd722cf,0xd623ce,0xd722ce,0xd621cd,0xce19ca,0xd11ccb,0xd21dca,0xc818cf,0xd722cd,0xcd19c9,0xc617d3,0xcb17c5,0xda25d3,0xce24cc,0xd328cc,0xdb32ef,0xbd15c4,0xdc5bea,0xda59eb,0xd959e9,0xf444fb,0xcf1ac9,0xd422d4,0xd923cd,0xe53af2,0xd321d3,0xe539f3,0xe035ed,0xd822cc,0xe83df5,0xd11fd1,0xd622d0,0xd21dcc,0xd429e2,0xe537ef,0xe136ee,0xe63bf3,0xe036ee,0xd72ce6,0xd428e1,0xdf34ed,0xe434e6,0xd43ddf,0xde30e4,0xbe0dbe,0xd823d3,0xc814c4,0xc20ab7,0xde1ec1,0xca16c6,0xc30ebe,0xbb0fbf,0xc510bf,0xc10cbc,0xd21cb6,0xca14c5,0xb80cd1,0xae0ea8,0xbf0ec3,0xd415c1,0xbc22b7,0xd317c4,0xb1179d,0xbc0fb4,0xcc47c7,0xb834b5,0xdc2cd9,0xd727d5,0xde30da,0xc834c6,0xeb40f3,0xd227d2,0xe82ed3,0xcf1ecf,0xe831c8,0xe130d4,0xcb1fce,0xc11dd1,0xc246ff,0xd716bc,0xc209b9,0xbb09bb,0xcf10b7,0xe727c7,0xee33bc,0xd71ec7,0xa725ce"
[*]  
[*]    ScanL := ZeroX - CFovX
[*]    ScanR := ZeroX + CFovX
[*]    ScanT := ZeroY - CFovY
[*]    ScanB := ZeroY + CFovY
[*]   
[*]    Loop, {
[*]    ~LButton::
[*]    Start := A_TickCount
[*]    while GetKeyState("LButton") && A_TickCount - Start < 600000
[*]    {
[*]    PixelSearch, AimPixelX, AimPixelY, ScanL, ScanT, ScanR, ScanB, EMCol, ColVn, Fast RGB
[*]    GoSub GetAimOffset
[*]    GoSub GetAimMoves
[*]    GoSub MouseMoves
[*]    }
[*]   
[*]    GetAimOffset:
[*]     AimX := AimPixelX - ZeroX
[*]     AimY := AimPixelY - ZeroY
[*]     AimY := AimPixelY+3 - ZeroY
[*]   
[*]      If ( AimX > 0 ) {
[*]       DirX := 1
[*]      }
[*]      If ( AimX < 0 ) {
[*]       DirX := -1
[*]      }
[*]      If ( AimY > 0 ) {
[*]       DirY := 1
[*]      }
[*]      If ( AimY < 0 ) {
[*]       DirY := -1
[*]      }
[*]     AimOffsetX := AimX * DirX
[*]     AimOffsetY := AimY * DirY
[*]    Return
[*]   
[*]    GetAimMoves:
[*]     RootX := Ceil(( AimOffsetX ** 1))
[*]     RootY := Ceil(( AimOffsetY ** 1))
[*]     MoveX := (RootX * DirX) / CSmoothX
[*]     MoveY := (RootY * DirY) / CSmoothY
[*]    Return
[*]   
[*]    MouseMoves:
[*]    MoveMultipler := ((0.0066 * Ingamesensitivity * 1) / BustSpeed)
[*]    AHI.SendMouseMove(11, MoveX * MoveMultipler, MoveY * MoveMultipler)
[*]    return
[*]    }
[*]    return
[/LIST]

Triggerbot

AutoHotkey:

   #Persistent
    #KeyHistory, 0
    #NoEnv
    #HotKeyInterval 1
    #MaxHotkeysPerInterval 127
    #InstallKeybdHook
    #UseHook
    #SingleInstance, Force
    #include Lib\AutoHotInterception.ahk
    global AHI := new AutoHotInterception()
  
  
  
    SetKeyDelay,-1, 8
    SetControlDelay, -1
    SetMouseDelay, -1
    SetWinDelay,-1
    SendMode, InputThenPlay
    SetBatchLines,-1
    ListLines, ON
    CoordMode, Pixel, Screen, RGB
    CoordMode, Mouse, Screen
    PID := DllCall("GetCurrentProcessId")
    Process, Priority, %PID%, High 
  
    EMCol := " 0xab0001, 0xb7394f, 0xb93742, 0xbb3340, 0xca4c5a, 0xbf3f4c, 0xd0262e, 0xd1262e, 0xd22830, 0xb0535f, 0xd1272e, 0xc13542, 0xca3d49, 0xc33541, 0xbb2e3a, 0xcc414d, 0xcc414d, 0xcb404c, 0xc23642, 0xbe303d, 0xcc404d, 0xcd4150, 0xd50f0e, 0xd50f0e, 0xd50f0e, 0xd50f0d, 0xd40f0e, 0xd50f0d, 0xd5100d, 0xd5100e, 0xd50f0d, 0xd00b0a, 0xcf4551, 0xcd414f, 0xc83c48, 0xc23642, 0xc93e4c, 0xd74c5b, 0xda505d, 0xcc404f, 0xc15353 "                                                                                                               
  
    ColVn := 44
    ZeroX := (A_ScreenWidth // 2)
    ZeroY := (A_ScreenHeight // 2)
    CFovX := 1
    CFovY := 1
  
    ScanL := ZeroX - 1
    ScanR := ZeroX + 1
    ScanT := ZeroY - 1
    ScanB := ZeroY + 1
  
  
    Loop, {
 
    PixelSearch, AimPixelX, AimPixelY, ScanL, ScanT, ScanR, ScanB, EMCol, ColVn, Fast RGB
 
    if GetKeyState("XButton2"){
        if (ErrorLevel=0) {
    PixelSearch, AimPixelX, AimPixelY, ScanL, ScanT, ScanR, ScanB, EMCol, ColVn, Fast RGB
    Loop , 1{
    AHI.SendMouseButtonEvent(11, 0, 1)
    sleep, 1
    AHI.SendMouseButtonEvent(11, 0, 0)
         }
       }
     }
   }

if u dont like it mess around with the fov aka ScanL R B and T as well as cfov id set it too 1 between5 also change colvn if u want

Guide:
This is your config.ini edit stuff here nowhere else unless you know what you are doing

AutoHotkey:

[main]
ColVn=38 ;Sensitivity to color Higher more Variations allowed lower less Variations allowed
ZeroX=960 ;Your first reselution part aka 1920/2 = 960
ZeroY=540 ;Your second reselution part aka 1080/2 = 540
CFovX=45 ;Your FOV bigger more space to aim to enemies less less space should stay the same number for x & y
CFovY=45 ;Your FOV bigger more space to aim to enemies less less space should stay the same number for x & y
CSmoothX=5 ;Your smoothnes aka how smooth aimbot is or humanization should also stay the same
CSmoothY=5 ;Your smoothnes aka how smooth aimbot is or humanization should also stay the same
MoveMultiplerX=12 ;Aimbot Movement speed multiplyer higher faster lower slower should also stay the same unless you know what you are doing
MoveMultiplerY=12 ;Aimbot Movement speed multiplyer higher faster lower slower should also stay the same unless you know what you are doing
Ingamesensitivity=3.5 ; this is your iNgame sens just input it here
BustSpeed=0.15 :We set the speed of the mouse. Set it according to your own mouse sensitivity in the game. The higher the value, the slower the speed. 0.01 = very fast, 1 = very slow.

Huge thanks to my friend epexxYT from UC for releasing this amazing art of work.
Credits: Sunara for base AHK Colorbot source code

Genişletmek için tıklayın ...