Overwatch 2 Color aimbot & triggerbot with interception driver

Hakuoro · 25 Eki 2022

i tried everything but couldn't find the solution, and everything is correct

corpse12 · 25 Eki 2022

Hakuoro' Alıntı:
i tried everything but couldn't find the solution, and everything is correct

i always get the same error i did evrything but dont know how to work it if u find any solution plz tell me :/

emrtaken · 25 Eki 2022

WolF97' Alıntı:
Ben yeni duymuş olabilirim belki

kötü bir şey demeım zaten

WolF97 · 25 Eki 2022

emralbyrk' Alıntı:
kötü bir şey demeım zaten

ben de demedim

XppaiCyber · 25 Eki 2022

atohidan' Alıntı:

STATUS: UNDETECTED

NEW UPDATE, DELETE config.ini AND MAKE A NEW .ahk FILE!!!
code is bellow

It's set for RED ENEMY COLOR, not MAGENTA

Instructions
1. Copy The Code down below and make it into a .ahk file
2. Get AutoHotInterception from This

Bağlantıları görmek için lütfen Giriş Yap

3. Also Get The interception Driver from this

Bağlantıları görmek için lütfen Giriş Yap

4. Install Interception with command line installer
5. Unpack AutoHotInterception
6. Place the ahk from step one into the folder where AutoHotInterception is unpacked
7. place The interception lib from Interception\library to AutoHotInterception\Lib
8. Restart your PC

Here is a Tutorial for the People That don't get it

For People getting Any errors Delete your config.ini and

if you are on laptop

Start the monitor.ahk in the main folder and then on right begin to tick one bock at a time to see which mouse is yours if you ticked on and the pressed buttons to appear in the below output box use that number here

AutoHotkey:

AHI.SendMouseMove(11, MoveX * MoveMultipler, MoveY * MoveMultipler) ; where it says 11 update it

DELETE THE config.ini
TO CHANGE THE HOTKEY REPLACE ALL THE 'F' WITH WHATEVER YOU WANT!

AutoHotkey:

#Persistent
    #KeyHistory, 0
    #NoEnv
    #HotKeyInterval 1
    #MaxHotkeysPerInterval 127
    #InstallKeybdHook
    #UseHook
    #SingleInstance, Force
    #Persistent ; (Interception hotkeys do not stop AHK from exiting, so use this)
    #include Lib\AutoHotInterception.ahk
    global AHI := new AutoHotInterception()
    EMCol := "0xab0001, 0xb7394f, 0xb93742, 0xbb3340, 0xca4c5a, 0xbf3f4c, 0xd0262e, 0xd1262e, 0xd22830, 0xb0535f, 0xd1272e, 0xc13542, 0xca3d49, 0xc33541, 0xbb2e3a, 0xcc414d, 0xcc414d, 0xcb404c, 0xc23642, 0xbe303d, 0xcc404d, 0xcd4150, 0xd50f0e, 0xd50f0e, 0xd50f0e, 0xd50f0d, 0xd40f0e, 0xd50f0d, 0xd5100d, 0xd5100e, 0xd50f0d, 0xd00b0a, 0xcf4551, 0xcd414f, 0xc83c48, 0xc23642, 0xc93e4c, 0xd74c5b, 0xda505d, 0xcc404f, 0xc15353, 0xd521cd,0xd722cf,0xd623ce,0xd722ce,0xd621cd,0xce19ca,0xd11ccb,0xd21dca,0xc818cf,0xd722cd,0xcd19c9,0xc617d3,0xcb17c5,0xda25d3,0xce24cc,0xd328cc,0xdb32ef,0xbd15c4,0xdc5bea,0xda59eb,0xd959e9,0xf444fb,0xcf1ac9,0xd422d4,0xd923cd,0xe53af2,0xd321d3,0xe539f3,0xe035ed,0xd822cc,0xe83df5,0xd11fd1,0xd622d0,0xd21dcc,0xd429e2,0xe537ef,0xe136ee,0xe63bf3,0xe036ee,0xd72ce6,0xd428e1,0xdf34ed,0xe434e6,0xd43ddf,0xde30e4,0xbe0dbe,0xd823d3,0xc814c4,0xc20ab7,0xde1ec1,0xca16c6,0xc30ebe,0xbb0fbf,0xc510bf,0xc10cbc,0xd21cb6,0xca14c5,0xb80cd1,0xae0ea8,0xbf0ec3,0xd415c1,0xbc22b7,0xd317c4,0xb1179d,0xbc0fb4,0xcc47c7,0xb834b5,0xdc2cd9,0xd727d5,0xde30da,0xc834c6,0xeb40f3,0xd227d2,0xe82ed3,0xcf1ecf,0xe831c8,0xe130d4,0xcb1fce,0xc11dd1,0xc246ff,0xd716bc,0xc209b9,0xbb09bb,0xcf10b7,0xe727c7,0xee33bc,0xd71ec7,0xa725ce"
 
 
    SetKeyDelay,-1, 8
    SetControlDelay, -1
    SetMouseDelay, -1
    SetWinDelay,-1
    SendMode, InputThenPlay
    SetBatchLines,-1
    ListLines, Off
    CoordMode, Pixel, Screen, RGB
    CoordMode, Mouse, Screen
    PID := DllCall("GetCurrentProcessId")
    Process, Priority, %PID%, High
    autoadjustedwidth := (A_ScreenWidth // 2)
    autoadjustedheight := (A_ScreenHeight // 2)
    TriggerBotON = "false"
    Loop, 10
    {
        ConfigFile2 = Config%A_Index%.ini
        if (FileExist(ConfigFile2))
        {
        }
        Else
        {
        IniWrite, 38, %ConfigFile2%, main, ColVn
        IniWrite, %autoadjustedwidth%, %ConfigFile2%, main, ZeroX
        IniWrite, %autoadjustedheight%, %ConfigFile2%, main, ZeroY
        IniWrite, 0, %ConfigFile2%, main, CFovX
        IniWrite, 0, %ConfigFile2%, main, CFovY
        IniWrite, 0, %ConfigFile2%, main, CSmoothX
        IniWrite, 0, %ConfigFile2%, main, CSmoothY
        IniWrite, 0, %ConfigFile2%, main, Ingamesensitivity
        IniWrite, 0, %configfile2%, main, DPI
        IniWrite, 0, %ConfigFile2%, main, BustSpeed
        }
    }
     
    Gui, Add, Text, x72 y19 w40 h20 , ColVn=
    Gui, Add, Text, x72 y39 w40 h20 , ZeroX=
    Gui, Add, Text, x72 y59 w40 h20 , ZeroY=
    Gui, Add, Text, x72 y79 w40 h20 , CFovX=
    Gui, Add, Text, x72 y99 w40 h20 , CFovY=
    Gui, Add, Text, x52 y119 w60 h20 , CSmoothX=
    Gui, Add, Text, x52 y139 w60 h20 , CSmoothY=
    Gui, Add, Text, x22 y159 w90 h20 , Ingamesensitivity=
    Gui, Add, Text, x84 y179 w60 h20 , DPI=
    Gui, Add, Text, x52 y199 w60 h20 , BustSpeed=
    Gui, Add, Edit, x112 y19 w70 h20 +VColVn, 38
    Gui, Add, Edit, x112 y39 w70 h20 +VZeroX, %autoadjustedwidth%
    Gui, Add, Edit, x112 y59 w70 h20 +VZeroY, %autoadjustedheight%
    Gui, Add, Edit, x112 y79 w70 h20 +VCFovX, 0
    Gui, Add, Edit, x112 y99 w70 h20 +VCFovY, 0
    Gui, Add, Edit, x112 y119 w70 h20 +VCSmoothX, 0
    Gui, Add, Edit, x112 y139 w70 h20 +VCSmoothY, 0
    Gui, Add, Edit, x112 y159 w70 h20 +VIngamesensitivity, 0
    Gui, Add, Edit, x112 y179 w70 h20 +VDPI, 0
    Gui, Add, Edit, x112 y199 w70 h20 +VBustSpeed, 0
    Gui, Add, Button, x192 y55 w90 h32 gsub1, Save
    Gui, Add, Button, x192 y88 w90 h32 gsub2, Load
        Gui, Add, Button, x192 y121 w90 h32 gsub3, TriggerBot ON
        Gui, Add, Button, x192 y154 w90 h32 gsub4, TriggerBot OFF
    Gui, Add, Button, x192 y188 w90 h32 gsub5, Auto-Adjust Resolution
    Gui, Add, DropDownList, x193 y19 w88 h21 +Vchoice, Config1|Config2|Config3|Config4|Config5|Config6|Config7|Config8|Config9|Config10
    Gui, Show, x977 y347 h230 w297, Config
    Winset, Alwaysontop, On, A
    Return
 
    sub1:
    {
    gui,submit,nohide
    configfile = %choice%.ini
    IniWrite, %ColVn%, %configfile%, main, ColVn
    IniWrite, %ZeroX%, %configfile%, main, ZeroX
    IniWrite, %ZeroY%, %configfile%, main, ZeroY
    IniWrite, %CFovX%, %configfile%, main, CFovX
    IniWrite, %CFovY%, %configfile%, main, CFovY
    IniWrite, %CSmoothX%, %configfile%, main, CSmoothX
    IniWrite, %CSmoothY%, %configfile%, main, CSmoothY
    IniWrite, %Ingamesensitivity%, %configfile%, main, Ingamesensitivity
    IniWrite, %DPI%, %configfile%, main, DPI
    IniWrite, %BustSpeed%, %configfile%, main, BustSpeed
    gui,submit,nohide
    return
    }
    sub2:
    {
    gui,submit,nohide
    configfile = %choice%.ini
    IniRead, ColVn, %configfile%, main, ColVn
    IniRead, CFovX, %configfile%, main, CFovX
    IniRead, CFovY, %configfile%, main, CFovY
    IniRead, ZeroX, %configfile%, main, ZeroX
    IniRead, ZeroY, %configfile%, main, ZeroY
    IniRead, CSmoothX, %configfile%, main, CSmoothX
    IniRead, CSmoothY, %configfile%, main, CSmoothY
    IniRead, Ingamesensitivity, %configfile%, main, Ingamesensitivity
    IniRead, DPI, %configfile%, main, DPI
    IniRead, BustSpeed, %configfile%, main, BustSpeed
    GuiControl,, ColVn, %ColVn%
    GuiControl,, CFovX, %CFovX%
    GuiControl,, CFovY, %CFovY%
    GuiControl,, ZeroX, %ZeroX%
    GuiControl,, ZeroY, %ZeroY%
    GuiControl,, CSmoothX, %CSmoothX%
    GuiControl,, CSmoothY, %CSmoothY%
    GuiControl,, Ingamesensitivity, %Ingamesensitivity%
    GuiControl,, DPI, %DPI%
    GuiControl,, BustSpeed, %BustSpeed%
    gui,submit,nohide
    return
    }
        sub3:
    {
        gui,submit,nohide
        TriggerBotON = "true"
        gui,submit,nohide
    return
    }
        sub4:
    {
        gui,submit,nohide
    TriggerBotON = "false"
        gui,submit,nohide
    return
    }
    sub5:
    {
    GuiControl,, ZeroX, %autoadjustedwidth%
    GuiControl,, ZeroY, %autoadjustedheight%
    return
    }
    Loop, {
    ~F::
        Start := A_TickCount
        while GetKeyState("F") && A_TickCount - Start < 600000
    {
    Gui,Submit,NoHide
    ScanL := ZeroX - CFovX
    ScanR := ZeroX + CFovX
    ScanT := ZeroY - CFovY
    ScanB := ZeroY + CFovY
    ColVn2 := 44
    ScanL2 := ZeroX - 3
    ScanR2 := ZeroX + 3
    ScanT2 := ZeroY - 3
    ScanB2 := ZeroY + 3
    PixelSearch, AimPixelX, AimPixelY, ScanL, ScanT, ScanR, ScanB, EMCol, ColVn, Fast RGB
    GoSub GetAimOffset
    GoSub GetAimMoves
    GoSub MouseMoves
    if TriggerBotON = "true"
    {
    if GetKeyState("F")
    PixelSearch, AimPixelX, AimPixelY, ScanL2, ScanT2, ScanR2, ScanB2, EMCol, ColVn2, Fast RGB
    if (ErrorLevel=0) {
    PixelSearch, AimPixelX, AimPixelY, ScanL2, ScanT2, ScanR2, ScanB2, EMCol, ColVn2, Fast RGB
    Loop , 1{
    AHI.SendMouseButtonEvent(11, 0, 1)
    Sleep, 1
    AHI.SendMouseButtonEvent(11, 0, 0)
    }
    }
    }
    }
 
 
 
    GetAimOffset:
     AimX := AimPixelX - ZeroX
     AimY := AimPixelY - ZeroY
     AimY := AimPixelY+3 - ZeroY
 
      If ( AimX > 0 ) {
       DirX := 1
      }
      If ( AimX < 0 ) {
       DirX := -1
      }
      If ( AimY > 0 ) {
       DirY := 1
      }
      If ( AimY < 0 ) {
       DirY := -1
      }
     AimOffsetX := AimX * DirX
     AimOffsetY := AimY * DirY
    Return
 
 
    GetAimMoves:
     RootX := Ceil(( AimOffsetX ** 1))
     RootY := Ceil(( AimOffsetY ** 1))
     MoveX := (RootX * DirX) / CSmoothX
     MoveY := (RootY * DirY) / CSmoothY
    Return
 
 
    MouseMoves:
    MoveMultipler := ((0.0066 * Ingamesensitivity * 1) / BustSpeed)
    AHI.SendMouseMove(11, MoveX * MoveMultipler, MoveY * MoveMultipler)
    return
    }
    return

if u dont like it mess around with the fov aka ScanL R B and T as well as cfov id set it too 1 between5 also change colvn if u want

Guide:
This is your config.ini edit stuff here nowhere else unless you know what you are doing

AutoHotkey:

[main]
ColVn=38 ;Sensitivity to color Higher more Variations allowed lower less Variations allowed
ZeroX=960 ;Your first reselution part aka 1920/2 = 960
ZeroY=540 ;Your second reselution part aka 1080/2 = 540
CFovX=45 ;Your FOV bigger more space to aim to enemies less less space should stay the same number for x & y
CFovY=45 ;Your FOV bigger more space to aim to enemies less less space should stay the same number for x & y
CSmoothX=5 ;Your smoothnes aka how smooth aimbot is or humanization should also stay the same
CSmoothY=5 ;Your smoothnes aka how smooth aimbot is or humanization should also stay the same
MoveMultiplerX=12 ;Aimbot Movement speed multiplyer higher faster lower slower should also stay the same unless you know what you are doing
MoveMultiplerY=12 ;Aimbot Movement speed multiplyer higher faster lower slower should also stay the same unless you know what you are doing
Ingamesensitivity=3.5 ; this is your iNgame sens just input it here
BustSpeed=0.15 :We set the speed of the mouse. Set it according to your own mouse sensitivity in the game. The higher the value, the slower the speed. 0.01 = very fast, 1 = very slow.

Huge thanks to my friend epexxYT from UC for releasing this amazing art of work.
Credits: Sunara for base AHK Colorbot source code

thanks for sharing, i'll try

osm316231 · 25 Eki 2022

Denenir bakalım ne kadar eğleniyoruz

streets916 · 25 Eki 2022

I got it to work but it shots very slow, how do you make it click faster or hold the button instead?

Ahmed salah121212123 · 25 Eki 2022

I will test

Hakuoro · 25 Eki 2022

corpse12' Alıntı:
i always get the same error i did evrything but dont know how to work it if u find any solution plz tell me :/

still same problem persists :/

john i am · 25 Eki 2022

Les Obrien' Alıntı:
this hack bans us if we use too much?

use with precaution , every cheat come with high risk getting ban

ozzi3 · 25 Eki 2022

thanks its working

canatan · 25 Eki 2022

I can't resolve the interception error

thedravengod1 · 25 Eki 2022

ozzi3' Alıntı:
thanks its working

aimbot or trigger?

atohidan · 25 Eki 2022

Hakuoro' Alıntı:
i tried everything but couldn't find the solution, and everything is correct

check the main post to fix for laptops, if not then delete the config.ini

Hakuoro · 25 Eki 2022

atohidan' Alıntı:
check the main post to fix for laptops, if not then delete the config.ini

i did everything you said but it still didn't work and as soon as i run the .ahk file, there are ten config.ini is this normal?

TOHA KHAN · 25 Eki 2022

atohidan' Alıntı:

STATUS: UNDETECTED

NEW UPDATE, DELETE config.ini AND MAKE A NEW .ahk FILE!!!
code is bellow

It's set for RED ENEMY COLOR, not MAGENTA

Instructions
1. Copy The Code down below and make it into a .ahk file
2. Get AutoHotInterception from This

Bağlantıları görmek için lütfen Giriş Yap

3. Also Get The interception Driver from this

Bağlantıları görmek için lütfen Giriş Yap

4. Install Interception with command line installer
5. Unpack AutoHotInterception
6. Place the ahk from step one into the folder where AutoHotInterception is unpacked
7. place The interception lib from Interception\library to AutoHotInterception\Lib
8. Restart your PC

Here is a Tutorial for the People That don't get it

For People getting Any errors Delete your config.ini and

if you are on laptop

Start the monitor.ahk in the main folder and then on right begin to tick one bock at a time to see which mouse is yours if you ticked on and the pressed buttons to appear in the below output box use that number here

AutoHotkey:

AHI.SendMouseMove(11, MoveX * MoveMultipler, MoveY * MoveMultipler) ; where it says 11 update it

DELETE THE config.ini
TO CHANGE THE HOTKEY REPLACE ALL THE 'F' WITH WHATEVER YOU WANT!

AutoHotkey:

#Persistent
    #KeyHistory, 0
    #NoEnv
    #HotKeyInterval 1
    #MaxHotkeysPerInterval 127
    #InstallKeybdHook
    #UseHook
    #SingleInstance, Force
    #Persistent ; (Interception hotkeys do not stop AHK from exiting, so use this)
    #include Lib\AutoHotInterception.ahk
    global AHI := new AutoHotInterception()
    EMCol := "0xab0001, 0xb7394f, 0xb93742, 0xbb3340, 0xca4c5a, 0xbf3f4c, 0xd0262e, 0xd1262e, 0xd22830, 0xb0535f, 0xd1272e, 0xc13542, 0xca3d49, 0xc33541, 0xbb2e3a, 0xcc414d, 0xcc414d, 0xcb404c, 0xc23642, 0xbe303d, 0xcc404d, 0xcd4150, 0xd50f0e, 0xd50f0e, 0xd50f0e, 0xd50f0d, 0xd40f0e, 0xd50f0d, 0xd5100d, 0xd5100e, 0xd50f0d, 0xd00b0a, 0xcf4551, 0xcd414f, 0xc83c48, 0xc23642, 0xc93e4c, 0xd74c5b, 0xda505d, 0xcc404f, 0xc15353, 0xd521cd,0xd722cf,0xd623ce,0xd722ce,0xd621cd,0xce19ca,0xd11ccb,0xd21dca,0xc818cf,0xd722cd,0xcd19c9,0xc617d3,0xcb17c5,0xda25d3,0xce24cc,0xd328cc,0xdb32ef,0xbd15c4,0xdc5bea,0xda59eb,0xd959e9,0xf444fb,0xcf1ac9,0xd422d4,0xd923cd,0xe53af2,0xd321d3,0xe539f3,0xe035ed,0xd822cc,0xe83df5,0xd11fd1,0xd622d0,0xd21dcc,0xd429e2,0xe537ef,0xe136ee,0xe63bf3,0xe036ee,0xd72ce6,0xd428e1,0xdf34ed,0xe434e6,0xd43ddf,0xde30e4,0xbe0dbe,0xd823d3,0xc814c4,0xc20ab7,0xde1ec1,0xca16c6,0xc30ebe,0xbb0fbf,0xc510bf,0xc10cbc,0xd21cb6,0xca14c5,0xb80cd1,0xae0ea8,0xbf0ec3,0xd415c1,0xbc22b7,0xd317c4,0xb1179d,0xbc0fb4,0xcc47c7,0xb834b5,0xdc2cd9,0xd727d5,0xde30da,0xc834c6,0xeb40f3,0xd227d2,0xe82ed3,0xcf1ecf,0xe831c8,0xe130d4,0xcb1fce,0xc11dd1,0xc246ff,0xd716bc,0xc209b9,0xbb09bb,0xcf10b7,0xe727c7,0xee33bc,0xd71ec7,0xa725ce"
 
 
    SetKeyDelay,-1, 8
    SetControlDelay, -1
    SetMouseDelay, -1
    SetWinDelay,-1
    SendMode, InputThenPlay
    SetBatchLines,-1
    ListLines, Off
    CoordMode, Pixel, Screen, RGB
    CoordMode, Mouse, Screen
    PID := DllCall("GetCurrentProcessId")
    Process, Priority, %PID%, High
    autoadjustedwidth := (A_ScreenWidth // 2)
    autoadjustedheight := (A_ScreenHeight // 2)
    TriggerBotON = "false"
    Loop, 10
    {
        ConfigFile2 = Config%A_Index%.ini
        if (FileExist(ConfigFile2))
        {
        }
        Else
        {
        IniWrite, 38, %ConfigFile2%, main, ColVn
        IniWrite, %autoadjustedwidth%, %ConfigFile2%, main, ZeroX
        IniWrite, %autoadjustedheight%, %ConfigFile2%, main, ZeroY
        IniWrite, 0, %ConfigFile2%, main, CFovX
        IniWrite, 0, %ConfigFile2%, main, CFovY
        IniWrite, 0, %ConfigFile2%, main, CSmoothX
        IniWrite, 0, %ConfigFile2%, main, CSmoothY
        IniWrite, 0, %ConfigFile2%, main, Ingamesensitivity
        IniWrite, 0, %configfile2%, main, DPI
        IniWrite, 0, %ConfigFile2%, main, BustSpeed
        }
    }
     
    Gui, Add, Text, x72 y19 w40 h20 , ColVn=
    Gui, Add, Text, x72 y39 w40 h20 , ZeroX=
    Gui, Add, Text, x72 y59 w40 h20 , ZeroY=
    Gui, Add, Text, x72 y79 w40 h20 , CFovX=
    Gui, Add, Text, x72 y99 w40 h20 , CFovY=
    Gui, Add, Text, x52 y119 w60 h20 , CSmoothX=
    Gui, Add, Text, x52 y139 w60 h20 , CSmoothY=
    Gui, Add, Text, x22 y159 w90 h20 , Ingamesensitivity=
    Gui, Add, Text, x84 y179 w60 h20 , DPI=
    Gui, Add, Text, x52 y199 w60 h20 , BustSpeed=
    Gui, Add, Edit, x112 y19 w70 h20 +VColVn, 38
    Gui, Add, Edit, x112 y39 w70 h20 +VZeroX, %autoadjustedwidth%
    Gui, Add, Edit, x112 y59 w70 h20 +VZeroY, %autoadjustedheight%
    Gui, Add, Edit, x112 y79 w70 h20 +VCFovX, 0
    Gui, Add, Edit, x112 y99 w70 h20 +VCFovY, 0
    Gui, Add, Edit, x112 y119 w70 h20 +VCSmoothX, 0
    Gui, Add, Edit, x112 y139 w70 h20 +VCSmoothY, 0
    Gui, Add, Edit, x112 y159 w70 h20 +VIngamesensitivity, 0
    Gui, Add, Edit, x112 y179 w70 h20 +VDPI, 0
    Gui, Add, Edit, x112 y199 w70 h20 +VBustSpeed, 0
    Gui, Add, Button, x192 y55 w90 h32 gsub1, Save
    Gui, Add, Button, x192 y88 w90 h32 gsub2, Load
        Gui, Add, Button, x192 y121 w90 h32 gsub3, TriggerBot ON
        Gui, Add, Button, x192 y154 w90 h32 gsub4, TriggerBot OFF
    Gui, Add, Button, x192 y188 w90 h32 gsub5, Auto-Adjust Resolution
    Gui, Add, DropDownList, x193 y19 w88 h21 +Vchoice, Config1|Config2|Config3|Config4|Config5|Config6|Config7|Config8|Config9|Config10
    Gui, Show, x977 y347 h230 w297, Config
    Winset, Alwaysontop, On, A
    Return
 
    sub1:
    {
    gui,submit,nohide
    configfile = %choice%.ini
    IniWrite, %ColVn%, %configfile%, main, ColVn
    IniWrite, %ZeroX%, %configfile%, main, ZeroX
    IniWrite, %ZeroY%, %configfile%, main, ZeroY
    IniWrite, %CFovX%, %configfile%, main, CFovX
    IniWrite, %CFovY%, %configfile%, main, CFovY
    IniWrite, %CSmoothX%, %configfile%, main, CSmoothX
    IniWrite, %CSmoothY%, %configfile%, main, CSmoothY
    IniWrite, %Ingamesensitivity%, %configfile%, main, Ingamesensitivity
    IniWrite, %DPI%, %configfile%, main, DPI
    IniWrite, %BustSpeed%, %configfile%, main, BustSpeed
    gui,submit,nohide
    return
    }
    sub2:
    {
    gui,submit,nohide
    configfile = %choice%.ini
    IniRead, ColVn, %configfile%, main, ColVn
    IniRead, CFovX, %configfile%, main, CFovX
    IniRead, CFovY, %configfile%, main, CFovY
    IniRead, ZeroX, %configfile%, main, ZeroX
    IniRead, ZeroY, %configfile%, main, ZeroY
    IniRead, CSmoothX, %configfile%, main, CSmoothX
    IniRead, CSmoothY, %configfile%, main, CSmoothY
    IniRead, Ingamesensitivity, %configfile%, main, Ingamesensitivity
    IniRead, DPI, %configfile%, main, DPI
    IniRead, BustSpeed, %configfile%, main, BustSpeed
    GuiControl,, ColVn, %ColVn%
    GuiControl,, CFovX, %CFovX%
    GuiControl,, CFovY, %CFovY%
    GuiControl,, ZeroX, %ZeroX%
    GuiControl,, ZeroY, %ZeroY%
    GuiControl,, CSmoothX, %CSmoothX%
    GuiControl,, CSmoothY, %CSmoothY%
    GuiControl,, Ingamesensitivity, %Ingamesensitivity%
    GuiControl,, DPI, %DPI%
    GuiControl,, BustSpeed, %BustSpeed%
    gui,submit,nohide
    return
    }
        sub3:
    {
        gui,submit,nohide
        TriggerBotON = "true"
        gui,submit,nohide
    return
    }
        sub4:
    {
        gui,submit,nohide
    TriggerBotON = "false"
        gui,submit,nohide
    return
    }
    sub5:
    {
    GuiControl,, ZeroX, %autoadjustedwidth%
    GuiControl,, ZeroY, %autoadjustedheight%
    return
    }
    Loop, {
    ~F::
        Start := A_TickCount
        while GetKeyState("F") && A_TickCount - Start < 600000
    {
    Gui,Submit,NoHide
    ScanL := ZeroX - CFovX
    ScanR := ZeroX + CFovX
    ScanT := ZeroY - CFovY
    ScanB := ZeroY + CFovY
    ColVn2 := 44
    ScanL2 := ZeroX - 3
    ScanR2 := ZeroX + 3
    ScanT2 := ZeroY - 3
    ScanB2 := ZeroY + 3
    PixelSearch, AimPixelX, AimPixelY, ScanL, ScanT, ScanR, ScanB, EMCol, ColVn, Fast RGB
    GoSub GetAimOffset
    GoSub GetAimMoves
    GoSub MouseMoves
    if TriggerBotON = "true"
    {
    if GetKeyState("F")
    PixelSearch, AimPixelX, AimPixelY, ScanL2, ScanT2, ScanR2, ScanB2, EMCol, ColVn2, Fast RGB
    if (ErrorLevel=0) {
    PixelSearch, AimPixelX, AimPixelY, ScanL2, ScanT2, ScanR2, ScanB2, EMCol, ColVn2, Fast RGB
    Loop , 1{
    AHI.SendMouseButtonEvent(11, 0, 1)
    Sleep, 1
    AHI.SendMouseButtonEvent(11, 0, 0)
    }
    }
    }
    }
 
 
 
    GetAimOffset:
     AimX := AimPixelX - ZeroX
     AimY := AimPixelY - ZeroY
     AimY := AimPixelY+3 - ZeroY
 
      If ( AimX > 0 ) {
       DirX := 1
      }
      If ( AimX < 0 ) {
       DirX := -1
      }
      If ( AimY > 0 ) {
       DirY := 1
      }
      If ( AimY < 0 ) {
       DirY := -1
      }
     AimOffsetX := AimX * DirX
     AimOffsetY := AimY * DirY
    Return
 
 
    GetAimMoves:
     RootX := Ceil(( AimOffsetX ** 1))
     RootY := Ceil(( AimOffsetY ** 1))
     MoveX := (RootX * DirX) / CSmoothX
     MoveY := (RootY * DirY) / CSmoothY
    Return
 
 
    MouseMoves:
    MoveMultipler := ((0.0066 * Ingamesensitivity * 1) / BustSpeed)
    AHI.SendMouseMove(11, MoveX * MoveMultipler, MoveY * MoveMultipler)
    return
    }
    return

if u dont like it mess around with the fov aka ScanL R B and T as well as cfov id set it too 1 between5 also change colvn if u want

Guide:
This is your config.ini edit stuff here nowhere else unless you know what you are doing

AutoHotkey:

[main]
ColVn=38 ;Sensitivity to color Higher more Variations allowed lower less Variations allowed
ZeroX=960 ;Your first reselution part aka 1920/2 = 960
ZeroY=540 ;Your second reselution part aka 1080/2 = 540
CFovX=45 ;Your FOV bigger more space to aim to enemies less less space should stay the same number for x & y
CFovY=45 ;Your FOV bigger more space to aim to enemies less less space should stay the same number for x & y
CSmoothX=5 ;Your smoothnes aka how smooth aimbot is or humanization should also stay the same
CSmoothY=5 ;Your smoothnes aka how smooth aimbot is or humanization should also stay the same
MoveMultiplerX=12 ;Aimbot Movement speed multiplyer higher faster lower slower should also stay the same unless you know what you are doing
MoveMultiplerY=12 ;Aimbot Movement speed multiplyer higher faster lower slower should also stay the same unless you know what you are doing
Ingamesensitivity=3.5 ; this is your iNgame sens just input it here
BustSpeed=0.15 :We set the speed of the mouse. Set it according to your own mouse sensitivity in the game. The higher the value, the slower the speed. 0.01 = very fast, 1 = very slow.

Huge thanks to my friend epexxYT from UC for releasing this amazing art of work.
Credits: Sunara for base AHK Colorbot source code

Need this for valorant

canatan · 25 Eki 2022

I wonder if someone working can send the ahk file in a private message

hardgamer03 · 25 Eki 2022

Sybrus' Alıntı:
Ban yiyen oldu mu arkadaşlar bununla ilgili, denedim 1-2 saat sorun yok güne sürpriz ile uyanmam umarım

hocam nasıl yaptığını açıklayabilir misin? bana bu ekran geliyor scripti çalıştırınca fakat sonra ne yapacağımı bilmiyorum. trigger bot on'a basıyorum fakat çalışmıyor falan

RIP HACK · 25 Eki 2022

is it safe bro ??

huzeyfa Haj Shekh · 25 Eki 2022

It's free?

Overwatch 2 Color aimbot & triggerbot with interception driver

Hakuoro

Ekli dosyalar

corpse12

emrtaken

WolF97

bir ucaktik dustuk bir gemiydik battik

XppaiCyber

osm316231

wosmnn

streets916

Ahmed salah121212123

Hakuoro

john i am

ozzi3

canatan

thedravengod1

atohidan

Hakuoro

TOHA KHAN

canatan

hardgamer03

Ekli dosyalar

RIP HACK

huzeyfa Haj Shekh

Benzer Konular

Overwatch 2 Color aimbot & triggerbot with interception driver

Ekli dosyalar

bir ucaktik dustuk bir gemiydik battik

wosmnn

Ekli dosyalar

Benzer Konular

Privacy & Transparency

Privacy & Transparency