hala çalışıyor mu ki? ve ud mitek şüphem ghub ile yapılan pixelbotların dt olması sebebiyle bununda ban riski olabiliceği
hayır pixel botlar bittide birkere vanguardın listesine girdi :dhala çalışıyor mu ki? ve ud mi
Bu Makroyu Çalıştırabilmeniz için önce gLua.lua kodlarını (D:/) Diskine oluşturun.
Çalışması için Bilgisayarınızda Logitech Gaming Software olması gerekiyor ve en az 1 adet Logitech ürününüz olması gerekiiyor Kulaklık olabilir mouse olabilir Klavye olabilir.
Bence Ban riski yoktur çünki Bu tarz legit Logitech gibi yazılımlara ban atmıyorlar.
Desteklediği Silahlar : AKM-M4A4-M416-SCARL-UMP9
Ekli dosyayı görüntüle 9762
Kod:local current_weapon = "none" -------------------------------------------------------------------------- ---------------- Upgraded By LeftSpace -------------------------------- ----------------Website https://memoryhackers.org/ -------------------- ---Original Author : @liantian-cn - https://github.com/liantian-cn/logitech-pubg -------------------------------------------------------------------------- ---- key bind ---- local ump9_key = 6 local akm_key = 2 local m16a4_key = 5 local m416_key = 3 local scarl_key = 4 local uzi_key = nil local set_off_key = 7 ---- fire key ---- local fire_key = "Pause" -- oyundaki ates tusu Pause Break Tusu local full_mode_key = "end" -- kullanmyrm local mode_switch_key = "delete" -- kullanmyrm ---- ignore key ---- ---- kullanılabiliir tuslar "lalt", "ralt", "alt" "lshift", "rshift", "shift" "lctrl", "rctrl", "ctrl" local ignore_key = "lalt" -- sol alt tusuna bastıgınızda makro calismas --- Oyun icindeki Hassasiyet 50 olmak zorunda --- varsayılan 50.0 local target_sensitivity = 50 local scope_sensitivity = 50 local full_sensitivity = 50 local scope4x_sensitivity = 50 ---- Obfs setting ---- Two firing time intervals = weapon_speed * interval_ratio * ( 1 + random_seed * ( 0 ~ 1)) local weapon_speed_mode = false -- local obfs_mode = false local obfs_mode = true local interval_ratio = 0.75 local random_seed = 1 -- local fullmode = false local fullmode = false -------------------------------------------------------------------------- ---------------- Recoil Table ------------------------------ ---------------- You can fix the value here ------------------------------ -------------------------------------------------------------------------- local recoil_table = {} recoil_table["ump9"] = { basic={30,31,32,34,37,35,35,36,42,38,39,42,42,41,41,41,41,42,42,42,43,40,41,43,40,40,40,41,42}, full={0}, quadruple={0}, speed = 90 } recoil_table["akm"] = { basic={56,41,42,46,48,58,58.5,62,64,67,68,71,72,74.4,77,72.5}, full={0}, quadruple={0}, speed = 100 } recoil_table["m16a4"] = { basic={42.3,31.2,32.4,42.3,50.4,54.1,62.1,60,62.5,65.5,63,62.1,64.4,64.4,65.25,63.9}, full={0}, quadruple={0}, speed = 80 } recoil_table["m416"] = { basic={43,30,34,36,41,40,46,47,45.6,46.5,47.5,46.5,49.2,52.2,53.1,54,54,54,54,55,56,56,56,56,56,57,57,57,57,57}, full={0}, quadruple={}, speed = 90 } recoil_table["scarl"] = { basic={40,25,31.5,39.6,39.6,41.4,42.3,42.3,43.2,48.6,50.4,52.2,54.5,53.2,55,59}, full={0}, quadruple={0}, speed = 100 } recoil_table["uzi"] = { basic={18,18,18,19,19,21,24,24,30,26,30,30,34,34,38}, full={0}, quadruple={0}, speed = 48 } recoil_table["none"] = { basic={0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0}, quadruple={0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0}, speed = 60 } -------------------------------------------------------------------------- ---------------- Function ------------------------------ -------------------------------------------------------------------------- function convert_sens(unconvertedSens) return 0.002 * math.pow(10, unconvertedSens / 50) end function calc_sens_scale(sensitivity) return convert_sens(sensitivity)/convert_sens(50) end local target_scale = calc_sens_scale(target_sensitivity) local scope_scale = calc_sens_scale(scope_sensitivity) local full_scale = calc_sens_scale(full_sensitivity) local scope4x_scale = calc_sens_scale(scope4x_sensitivity) function recoil_mode() return "basic"; end function recoil_value(_weapon,_duration) local _mode = recoil_mode() local step = (math.floor(_duration/100)) + 1 if step > 40 then step = 40 end local weapon_recoil = recoil_table[_weapon][_mode][step] -- OutputLogMessage("weapon_recoil = %s\n", weapon_recoil) local weapon_speed = 30 if weapon_speed_mode then weapon_speed = recoil_table[_weapon]["speed"] end -- OutputLogMessage("weapon_speed = %s\n", weapon_speed) local weapon_intervals = weapon_speed if obfs_mode then local coefficient = interval_ratio * ( 1 + random_seed * math.random()) weapon_intervals = math.floor(coefficient * weapon_speed) end -- OutputLogMessage("weapon_intervals = %s\n", weapon_intervals) recoil_recovery = weapon_recoil * weapon_intervals / 100 -- issues/3 if IsMouseButtonPressed(2) then recoil_recovery = recoil_recovery / target_scale elseif recoil_mode() == "basic" then recoil_recovery = recoil_recovery / scope_scale elseif recoil_mode() == "full" then recoil_recovery = recoil_recovery / full_scale elseif recoil_mode() == "quadruple" then recoil_recovery= recoil_recovery / scope4x_scale end return weapon_intervals,recoil_recovery end -------------------------------------------------------------------------- ---------------- OnEvent ------------------------------ -------------------------------------------------------------------------- function OnEvent(event, arg) --OutputLogMessage("event = %s, arg = %s\n", event, arg) if (event == "PROFILE_ACTIVATED") then EnablePrimaryMouseButtonEvents(true) OutputLogMessage("aktif\n") elseif event == "PROFILE_DEACTIVATED" then current_weapon = "none" shoot_duration = 0.0 ReleaseKey(fire_key) ReleaseMouseButton(1) end if (event == "G_PRESSED" and arg == set_off_key) then current_weapon = "none" elseif (event == "G_PRESSED" and arg == akm_key) then current_weapon = "akm" elseif (event == "G_PRESSED" and arg == m16a4_key) then current_weapon = "m16a4" elseif (event == "G_PRESSED" and arg == m416_key) then current_weapon = "m416" elseif (event == "G_PRESSED" and arg == ump9_key) then current_weapon = "ump9" elseif (event == "G_PRESSED" and arg == uzi_key) then current_weapon = "uzi" elseif (event == "G_PRESSED" and arg == scarl_key) then current_weapon = "scarl" elseif (event == "MOUSE_BUTTON_PRESSED" and arg == 1) then --OutputLogMessage("mode : %s",recoil_mode()) if ((current_weapon == "none") or IsModifierPressed(ignore_key)) then PressKey(fire_key) repeat Sleep(30) until not IsMouseButtonPressed(1) ReleaseKey(fire_key) else local shoot_duration = 0.0 repeat local intervals,recovery = recoil_value(current_weapon,shoot_duration) PressAndReleaseKey(fire_key) MoveMouseRelative(0, recovery ) Sleep(intervals) shoot_duration = shoot_duration + intervals until not IsMouseButtonPressed(1) end elseif (event == "MOUSE_BUTTON_RELEASED" and arg == 1) then ReleaseKey(fire_key) end end -->> gLua 3. parti Razer Tarzı Mouseleri desteklemek icin kullaniliyor dofile( [[D:\gLua.lua]] ) EnableThirdPartyMouseEvents() EnableKeyboardKeyEvents()
gLua.lua:
Kod:-->>> gLua Script v.1002 <<<-- --(c)reated 2014 by UPIA - based on guru kgobers' Poll and Task Engine @ forums.logitech.com gLua = {} gLua.PollFamily = "mouse" gLua.PollInterval = 10 gLua.PollDeadtime = 100 gLua.PollRunning = true gLua.PollCheckTime = false gLua.LegalMbKeys = {1,2,3,4,5} gLua.LegalFamilies = {"mouse", "kb", "lhc"} gLua.LegalKBKeys = {"scrolllock", "capslock", "numlock", "lalt", "ralt", "alt", "lshift", "rshift", "shift", "lctrl", "rctrl", "ctrl"} gLua.SetupKBKeys = {"scrolllock", "capslock", "numlock", "lalt", "ralt", "lshift", "rshift", "lctrl", "rctrl"} gLua.KeyCatch = {} gLua.KeyEvent = false gLua.MbCatch = {} gLua.MbEvent = false gLua.MbSwitch23 = false gLua.EventFunction = false gLua.EventFunctionAsTask = false gLua.TaskEngine = false gLua.TaskPrecision = false gLua.OnPollEventStatus = false gLua.OnMouseEventStatus = false gLua.OnGKeyEventStatus = false gLua.OnMKeyEventStatus = false gLua.OnKeyEventStatus = false gLua.LogEM = false gLua.Sleep = Sleep gLua.IsMouseButtonPressed = IsMouseButtonPressed gLua.PressMouseButton = PressMouseButton gLua.ReleaseMouseButton = ReleaseMouseButton gLua.PressAndReleaseMouseButton = PressAndReleaseMouseButton gLua.PollGmksHook = GetMKeyState gLua.PollSmksHook = SetMKeyState gLua.OnEvent = OnEvent --gLua.Runtime = 0 gLua.Down = {} gLua.TaskList = {} gLua.TaskActive = false function EnablePollTimeCheck(bool) bool = bool or true if bool ~= false and bool ~= true then gLua.log("WARNING: EnablePollTimeCheck() - bad parameter '" .. tostring(bool) .. "' ") return false else gLua.PollCheckTime = bool end end function EnableTaskEngine(bool) bool = bool or true if bool ~= false and bool ~= true then gLua.log("WARNING: EnableTaskEngine() - bad parameter '" .. tostring(bool) .. "' ") return false else gLua.TaskEngine = bool if gLua.TaskEngine then TaskRun = gLua.TaskRun TaskAbort = gLua.TaskAbort TaskAbortAll = gLua.TaskAbortAll TaskSleep = gLua.TaskSleep RunTask = gLua.TaskRun AbortTask = gLua.TaskAbort end return true end end function EnableTaskPrecision(bool) bool = bool or true if bool ~= false and bool ~= true then gLua.log("WARNING: EnableTaskPrecision() - bad parameter '" .. tostring(bool) .. "' ") return false else gLua.TaskPrecision = bool return true end end function EnableCustomPolling(family, interval) family = string.lower(family) or "" interval = interval or 10 if gLua.TableFind(gLua.LegalFamilies, family, "ipairs") == 0 then gLua.log("WARNING: EnableCustomPolling() - bad family '" .. family .. "' ignored") return false end if interval < 10 then gLua.log("WARNING: EnableCustomPolling() - interval '" .. interval .. "' too short, set to 10ms" ) interval = 10 end gLua.PollFamily = family gLua.PollInterval = interval return true end function EnableKeyboardKeyEvents(...) gLua.KeyCatch = {} if # arg == 0 or arg[1] == true then arg = gLua.SetupKBKeys elseif arg[1] == false then return true end for i,v in ipairs(arg) do v = string.lower(v) if gLua.TableFind(gLua.LegalKBKeys, v, "ipairs") > 0 then table.insert(gLua.KeyCatch, v) else gLua.log("WARNING: EnableKeyboardKeyEvents() - bad key '" .. v .. "' ignored" ) end end if # gLua.KeyCatch > 0 then gLua.KeyEvent = true end return true end function EnableThirdPartyMouseEvents(...) gLua.MbCatch = {} if # arg == 0 or arg[1] == true then arg = gLua.LegalMbKeys elseif arg[1] == false then return true end for i,v in ipairs(arg) do v = tonumber(v) if gLua.TableFind(gLua.LegalMbKeys, v, "ipairs") > 0 then table.insert(gLua.MbCatch, v) else gLua.log("WARNING: EnableThirdPartyMouseEvents() - bad button '" .. v .. "' ignored" ) end end if # gLua.MbCatch > 0 then gLua.MbEvent = true end return true end function EnableEventFunctions(bool, tasktyp) bool = bool or true tasktyp = tasktyp or false if bool ~= false and bool ~= true then gLua.log("WARNING: EnableEventFunctions() - bad parameter 1 '" .. tostring(bool) .. "' ") return false end if tasktyp ~= false and tasktyp ~= true then gLua.log("WARNING: EnableEventFunctions() - bad parameter 2 '" .. tostring(tasktyp) .. "' ") return false end gLua.EventFunction = bool gLua.EventFunctionAsTask = tasktyp return true end function EnableMouseButton23Switch(bool) bool = bool or true if bool ~= false and bool ~= true then gLua.log("WARNING: EnableMouseButton23Switch() - bad parameter '" .. tostring(bool) .. "' ") return false else gLua.MbSwitch23 = bool if gLua.MbSwitch23 then IsMouseButtonPressed = function(mb) return gLua.IsMouseButtonPressed( gLua.MbSwitch(mb) ) end PressMouseButton = function(mb) gLua.PressMouseButton( gLua.MbSwitch(mb) ) end ReleaseMouseButton = function(mb) gLua.ReleaseMouseButton( gLua.MbSwitch(mb) ) end PressAndReleaseMouseButton = function(mb) gLua.PressAndReleaseMouseButton( gLua.MbSwitch(mb) ) end end return true end end function gLua.log(str) OutputLogMessage(str .. "\n") end function gLua.OnXEventSetStatus() if type(_G["OnPollEvent"]) == "function" then gLua.OnPollEventStatus = true end if type(_G["OnMouseEvent"]) == "function" then gLua.OnMouseEventStatus = true end if type(_G["OnGKeyEvent"]) == "function" then gLua.OnGKeyEventStatus = true end if type(_G["OnMKeyEvent"]) == "function" then gLua.OnMKeyEventStatus = true end if type(_G["OnKeyEvent"]) == "function" then gLua.OnKeyEventStatus = true end end function gLua.OnXEventExecute(event, arg, family) if gLua.OnPollEventStatus and event == "POLL" then _G["OnPollEvent"](event, arg, family) end if gLua.OnMouseEventStatus and ( event == "MOUSE_BUTTON_PRESSED" or event == "MOUSE_BUTTON_RELEASED" ) then _G["OnMouseEvent"](event, arg, family) end if gLua.OnGKeyEventStatus and ( event == "G_PRESSED" or event == "G_RELEASED" ) then _G["OnGKeyEvent"](event, arg, family) end if gLua.OnMKeyEventStatus and ( event == "M_PRESSED" or event == "M_RELEASED" ) then _G["OnMKeyEvent"](event, arg, family) end if gLua.OnKeyEventStatus and ( event == "K_PRESSED" or event == "K_RELEASED" ) then _G["OnKeyEvent"](event, arg, family) end end OnEvent = function(event, arg, family) family = family or "" local st = gLua.PollStateTimer gLua.Runtime = GetRunningTime() if event == "PROFILE_ACTIVATED" then gLua.E = "PA" gLua.EM = "K0L0_PA" gLua.KeyInitiateLocks() gLua.MKeyInitiateID() gLua.OnXEventSetStatus() --if not gLua.TaskEngine then gLua.TaskPrecision = false end gLua.PollStart() elseif event == "PROFILE_DEACTIVATED" then gLua.E = "PD" gLua.EM = "K0L0_PD" else gLua.EventCreateID(event,arg,family) gLua.MKeyCreateID(event,arg,family) end gLua.OnEventExecute(event, arg, family) gLua.KeyGetAll() gLua.MbGetAll() if gLua.TaskEngine then gLua.TaskCheck() end gLua.Poll(event, arg, family, st) end function gLua.OnEventExecute(event, arg, family) if gLua.E ~= "" then if gLua.LogEM then gLua.log(gLua.EM) end gLua.OnXEventExecute(event,arg,family) if gLua.EventFunction then -- run as task local n00 = "K0L0_" .. gLua.E if type(_G[n00]) == "function" then if gLua.EventFunctionAsTask then gLua.TaskRun(n00, _G[n00], event, arg, family) else _G[n00]() end end local nx0 = "K" .. gLua.MK .. "L0_" .. gLua.E if type(_G[nx0]) == "function" then if gLua.EventFunctionAsTask then gLua.TaskRun(nx0, _G[nx0], event, arg, family) else _G[nx0]() end end local n0x = "K0L" .. gLua.ML .. "_" .. gLua.E if type(_G[n0x]) == "function" then if gLua.EventFunctionAsTask then gLua.TaskRun(n0x, _G[n0x], event, arg, family) else _G[n0x]() end end local nxx = "K" .. gLua.MK .. "L" .. gLua.ML .. "_" .. gLua.E if type(_G[nxx]) == "function" then if gLua.EventFunctionAsTask then gLua.TaskRun(nxx, _G[nxx], event, arg, family) else _G[nxx]() end end else gLua.OnEvent(event, arg, family) end end end function gLua.TableFind(array, search, typ) -- Find element in 1D Array typ = typ or "ipairs" local ret = 0 if typ == "ipairs" then for i,v in ipairs(array) do if v == search then ret = i break end end else for i,v in pairs(array) do if v == search then ret = tostring(i) break end end end return ret end function gLua.MKeyInitiateID() gLua.MK = gLua.PollGmksHook("kb") gLua.ML = gLua.PollGmksHook("lhc") end function gLua.MKeyCreateID(e, a, f) if e == "M_PRESSED" then if f == "kb" then gLua.MK = a elseif f == "lhc" then gLua.ML = a end end end function gLua.EventCreateID(e, a, f) local id = "" if f == "mouse" then id = id .. "M" if e == "MOUSE_BUTTON_PRESSED" then id = id .. "pG" .. a gLua.Down[id] = true elseif e == "MOUSE_BUTTON_RELEASED" then gLua.Down[id .. "pG" .. a] = false id = id .. "rG" .. a else id = "" end else local key = string.sub(e, 1, 1) local typ = string.sub(e, 3, 3) if key == "G" or key == "M" then if f == "lhc" then id = id .. "L" elseif f == "kb" then id = id .. "K" end if typ == "P" then id = id .. "p" .. key .. a gLua.Down[id] = true elseif typ == "R" then gLua.Down[id .. "p" .. key .. a] = false id = id .. "r" .. key .. a end end end gLua.E = id gLua.EM = "K" .. gLua.MK .. "L" .. gLua.ML .. "_" .. gLua.E end function gLua.KeyGetAll() for i,v in pairs(gLua.KeyCatch) do gLua.E = "" local CurrDown = gLua.Down[v] if v == "scrolllock" or v == "capslock" or v == "numlock" then if IsKeyLockOn(v) then gLua.Down[v] = true if not CurrDown then gLua.E = "K" .. "p" .. string.upper(v) gLua.EM = "K" .. gLua.MK .. "L" .. gLua.ML .. "_" .. gLua.E if gLua.KeyEvent then gLua.OnEventExecute("K_PRESSED", v, "kb") end end else gLua.Down[v] = false if CurrDown then gLua.E = "K" .. "r" .. string.upper(v) gLua.EM = "K" .. gLua.MK .. "L" .. gLua.ML .. "_" .. gLua.E if gLua.KeyEvent then gLua.OnEventExecute("K_RELEASED", v, "kb") end end end else if IsModifierPressed(v) then gLua.Down[v] = true if not CurrDown then gLua.E = "K" .. "p" .. string.upper(v) gLua.EM = "K" .. gLua.MK .. "L" .. gLua.ML .. "_" .. gLua.E if gLua.KeyEvent then gLua.OnEventExecute("K_PRESSED", v, "kb") end end else gLua.Down[v] = false if CurrDown then gLua.E = "K" .. "r" .. string.upper(v) gLua.EM = "K" .. gLua.MK .. "L" .. gLua.ML .. "_" .. gLua.E if gLua.KeyEvent then gLua.OnEventExecute("K_RELEASED", v, "kb") end end end end end end function gLua.KeyInitiateLocks() local locks = {"scrolllock", "capslock", "numlock"} for i = 1, # locks do if gLua.TableFind(gLua.KeyCatch, locks[i], "ipairs") > 0 then if IsKeyLockOn( locks[i] ) then gLua.Down[ locks[i] ] = true end end end end function gLua.MbGetAll() for i,v in pairs(gLua.MbCatch) do --v = gLua.MbSwitch(v) gLua.E = "" local CurrDown = gLua.Down["MpG" .. v] if IsMouseButtonPressed(v) then gLua.Down["MpG" .. v] = true if not CurrDown then gLua.E = "MpG" .. v gLua.EM = "K" .. gLua.MK .. "L" .. gLua.ML .. "_" .. gLua.E if gLua.MbEvent then gLua.OnEventExecute("MOUSE_BUTTON_PRESSED", v, "mouse") end end else gLua.Down["MpG" .. v] = false if CurrDown then gLua.E = "MrG" .. v gLua.EM = "K" .. gLua.MK .. "L" .. gLua.ML .. "_" .. gLua.E if gLua.MbEvent then gLua.OnEventExecute("MOUSE_BUTTON_RELEASED", v, "mouse") end end end end end function gLua.MbSwitch(mb) if gLua.MbSwitch23 then if mb == 2 then return 3 elseif mb == 3 then return 2 else return mb end else return mb end end ---------------------------------->> Poll Stuff @kgober --> function gLua.PollStart() gLua.PollActiveState = gLua.PollGmksHook(gLua.PollFamily) gLua.PollSmksHook(gLua.PollActiveState, gLua.PollFamily) end function gLua.PollStop() gLua.PollRunning = false end function gLua.Poll(event, arg, family, st) if gLua.PollRunning then if st == nil and gLua.PollStateTimer ~= nil then return end local t = GetRunningTime() if family == gLua.PollFamily then if event == "M_PRESSED" and arg ~= ActiveState then if gLua.PollStateTimer ~= nil and t >= gLua.PollStateTimer then gLua.PollStateTimer = nil end if gLua.PollStateTimer == nil then gLua.PollActiveState = arg end gLua.PollStateTimer = t + gLua.PollDeadtime elseif event == "M_RELEASED" and arg == gLua.PollActiveState then gLua.OnXEventExecute("POLL", 0, "") if gLua.TaskEngine and gLua.TaskPrecision and gLua.TaskNext then gLua.TaskNextLeft = gLua.PollInterval while gLua.TaskNext do if gLua.TaskNext < gLua.TaskNextLeft then Sleep(gLua.TaskNext) gLua.TaskNextLeft = gLua.TaskNextLeft - gLua.TaskNext gLua.TaskCheck() else break end end Sleep(gLua.TaskNextLeft) gLua.PollSmksHook(gLua.PollActiveState, gLua.PollFamily) else if gLua.PollCheckTime then local Tcheck = GetRunningTime() Sleep(gLua.PollInterval) Tcheck = GetRunningTime() - Tcheck if (Tcheck == 15 or Tcheck == 16) and (gLua.PollInterval ~= 15 and gLua.PollInterval ~= 16) then if type(_G["PollCheckAlert"]) == "function" then PollCheckAlert(Tcheck) end else if type(_G["PollCheckAlert"]) == "function" then PollCheckAlert(-1) end end else Sleep(gLua.PollInterval) end gLua.PollSmksHook(gLua.PollActiveState, gLua.PollFamily) end end end end end GetMKeyState = function(family) family = family or "kb" if family == gLua.PollFamily then return gLua.PollActiveState else return gLua.PollGmksHook(family) end end SetMKeyState = function(mkey, family) family = family or "kb" if family == gLua.PollFamily then if mkey == gLua.PollActiveState then return end gLua.PollActiveState = mkey gLua.PollStateTimer = GetRunningTime() + gLua.PollDeadtime end return gLua.PollSmksHook(mkey, family) end ---------------------------------->> Task Management functions @kgober --> function gLua.TaskCheck() local t = GetRunningTime() if gLua.TaskPrecision then gLua.TaskNext = false local next = gLua.PollInterval for key, task in pairs(gLua.TaskList) do local n = task.time - t if t >= task.time then gLua.TaskActive = key local s, d = coroutine.resume(task.task, task.run) --, task.key) gLua.TaskActive = false if (not s) or ((d or -1) < 0) then gLua.TaskList[key] = nil else task.time = task.time + d end else if n < next then gLua.TaskNext = n end end end else for key, task in pairs(gLua.TaskList) do if t >= task.time then gLua.TaskActive = key local s, d = coroutine.resume(task.task, task.run) --, task.key) gLua.TaskActive = false if (not s) or ((d or -1) < 0) then gLua.TaskList[key] = nil else task.time = task.time + d end end end end end function gLua.TaskRun(key, func, ...) gLua.TaskAbort(key) local task = {} task.time = GetRunningTime() task.task = coroutine.create(func) task.run = true gLua.TaskActive = key local s, d = coroutine.resume(task.task, ...) gLua.TaskActive = false if (s) and ((d or -1) >= 0) then task.time = task.time + d gLua.TaskList[key] = task end end function gLua.TaskStop(key) local task = gLua.TaskList[key] if task ~= nil then task.run = false end end function gLua.TaskAbort(key) local task = gLua.TaskList[key] if task == nil then return end while true do local s, d = coroutine.resume(task.task, false) if (not s) or ((d or -1) < 0) then gLua.TaskList[key] = nil return end end end function gLua.TaskAbortAll() gLua.TaskList={} end function gLua.TaskRunning(key) local task = gLua.TaskList[key] if task == nil then return false end return task.run end function gLua.TaskSleep(delay) return coroutine.yield(delay) end OutputLogMessage("gLua.Library loaded!\n") --eof (end of file)
Hocam kodları vermişsinde oyun içi sensivity ve dpi kaç olacağını söylwmemişsin tam çalışmıyor makro saçmalıyor bazenBu Makroyu Çalıştırabilmeniz için önce gLua.lua kodlarını (D:/) Diskine oluşturun.
Çalışması için Bilgisayarınızda Logitech Gaming Software olması gerekiyor ve en az 1 adet Logitech ürününüz olması gerekiiyor Kulaklık olabilir mouse olabilir Klavye olabilir.
Bence Ban riski yoktur çünki Bu tarz legit Logitech gibi yazılımlara ban atmıyorlar.
Desteklediği Silahlar : AKM-M4A4-M416-SCARL-UMP9
Ekli dosyayı görüntüle 9762
Kod:local current_weapon = "none" -------------------------------------------------------------------------- ---------------- Upgraded By LeftSpace -------------------------------- ----------------Website https://memoryhackers.org/ -------------------- ---Original Author : @liantian-cn - https://github.com/liantian-cn/logitech-pubg -------------------------------------------------------------------------- ---- key bind ---- local ump9_key = 6 local akm_key = 2 local m16a4_key = 5 local m416_key = 3 local scarl_key = 4 local uzi_key = nil local set_off_key = 7 ---- fire key ---- local fire_key = "Pause" -- oyundaki ates tusu Pause Break Tusu local full_mode_key = "end" -- kullanmyrm local mode_switch_key = "delete" -- kullanmyrm ---- ignore key ---- ---- kullanılabiliir tuslar "lalt", "ralt", "alt" "lshift", "rshift", "shift" "lctrl", "rctrl", "ctrl" local ignore_key = "lalt" -- sol alt tusuna bastıgınızda makro calismas --- Oyun icindeki Hassasiyet 50 olmak zorunda --- varsayılan 50.0 local target_sensitivity = 50 local scope_sensitivity = 50 local full_sensitivity = 50 local scope4x_sensitivity = 50 ---- Obfs setting ---- Two firing time intervals = weapon_speed * interval_ratio * ( 1 + random_seed * ( 0 ~ 1)) local weapon_speed_mode = false -- local obfs_mode = false local obfs_mode = true local interval_ratio = 0.75 local random_seed = 1 -- local fullmode = false local fullmode = false -------------------------------------------------------------------------- ---------------- Recoil Table ------------------------------ ---------------- You can fix the value here ------------------------------ -------------------------------------------------------------------------- local recoil_table = {} recoil_table["ump9"] = { basic={30,31,32,34,37,35,35,36,42,38,39,42,42,41,41,41,41,42,42,42,43,40,41,43,40,40,40,41,42}, full={0}, quadruple={0}, speed = 90 } recoil_table["akm"] = { basic={56,41,42,46,48,58,58.5,62,64,67,68,71,72,74.4,77,72.5}, full={0}, quadruple={0}, speed = 100 } recoil_table["m16a4"] = { basic={42.3,31.2,32.4,42.3,50.4,54.1,62.1,60,62.5,65.5,63,62.1,64.4,64.4,65.25,63.9}, full={0}, quadruple={0}, speed = 80 } recoil_table["m416"] = { basic={43,30,34,36,41,40,46,47,45.6,46.5,47.5,46.5,49.2,52.2,53.1,54,54,54,54,55,56,56,56,56,56,57,57,57,57,57}, full={0}, quadruple={}, speed = 90 } recoil_table["scarl"] = { basic={40,25,31.5,39.6,39.6,41.4,42.3,42.3,43.2,48.6,50.4,52.2,54.5,53.2,55,59}, full={0}, quadruple={0}, speed = 100 } recoil_table["uzi"] = { basic={18,18,18,19,19,21,24,24,30,26,30,30,34,34,38}, full={0}, quadruple={0}, speed = 48 } recoil_table["none"] = { basic={0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0}, quadruple={0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0}, speed = 60 } -------------------------------------------------------------------------- ---------------- Function ------------------------------ -------------------------------------------------------------------------- function convert_sens(unconvertedSens) return 0.002 * math.pow(10, unconvertedSens / 50) end function calc_sens_scale(sensitivity) return convert_sens(sensitivity)/convert_sens(50) end local target_scale = calc_sens_scale(target_sensitivity) local scope_scale = calc_sens_scale(scope_sensitivity) local full_scale = calc_sens_scale(full_sensitivity) local scope4x_scale = calc_sens_scale(scope4x_sensitivity) function recoil_mode() return "basic"; end function recoil_value(_weapon,_duration) local _mode = recoil_mode() local step = (math.floor(_duration/100)) + 1 if step > 40 then step = 40 end local weapon_recoil = recoil_table[_weapon][_mode][step] -- OutputLogMessage("weapon_recoil = %s\n", weapon_recoil) local weapon_speed = 30 if weapon_speed_mode then weapon_speed = recoil_table[_weapon]["speed"] end -- OutputLogMessage("weapon_speed = %s\n", weapon_speed) local weapon_intervals = weapon_speed if obfs_mode then local coefficient = interval_ratio * ( 1 + random_seed * math.random()) weapon_intervals = math.floor(coefficient * weapon_speed) end -- OutputLogMessage("weapon_intervals = %s\n", weapon_intervals) recoil_recovery = weapon_recoil * weapon_intervals / 100 -- issues/3 if IsMouseButtonPressed(2) then recoil_recovery = recoil_recovery / target_scale elseif recoil_mode() == "basic" then recoil_recovery = recoil_recovery / scope_scale elseif recoil_mode() == "full" then recoil_recovery = recoil_recovery / full_scale elseif recoil_mode() == "quadruple" then recoil_recovery= recoil_recovery / scope4x_scale end return weapon_intervals,recoil_recovery end -------------------------------------------------------------------------- ---------------- OnEvent ------------------------------ -------------------------------------------------------------------------- function OnEvent(event, arg) --OutputLogMessage("event = %s, arg = %s\n", event, arg) if (event == "PROFILE_ACTIVATED") then EnablePrimaryMouseButtonEvents(true) OutputLogMessage("aktif\n") elseif event == "PROFILE_DEACTIVATED" then current_weapon = "none" shoot_duration = 0.0 ReleaseKey(fire_key) ReleaseMouseButton(1) end if (event == "G_PRESSED" and arg == set_off_key) then current_weapon = "none" elseif (event == "G_PRESSED" and arg == akm_key) then current_weapon = "akm" elseif (event == "G_PRESSED" and arg == m16a4_key) then current_weapon = "m16a4" elseif (event == "G_PRESSED" and arg == m416_key) then current_weapon = "m416" elseif (event == "G_PRESSED" and arg == ump9_key) then current_weapon = "ump9" elseif (event == "G_PRESSED" and arg == uzi_key) then current_weapon = "uzi" elseif (event == "G_PRESSED" and arg == scarl_key) then current_weapon = "scarl" elseif (event == "MOUSE_BUTTON_PRESSED" and arg == 1) then --OutputLogMessage("mode : %s",recoil_mode()) if ((current_weapon == "none") or IsModifierPressed(ignore_key)) then PressKey(fire_key) repeat Sleep(30) until not IsMouseButtonPressed(1) ReleaseKey(fire_key) else local shoot_duration = 0.0 repeat local intervals,recovery = recoil_value(current_weapon,shoot_duration) PressAndReleaseKey(fire_key) MoveMouseRelative(0, recovery ) Sleep(intervals) shoot_duration = shoot_duration + intervals until not IsMouseButtonPressed(1) end elseif (event == "MOUSE_BUTTON_RELEASED" and arg == 1) then ReleaseKey(fire_key) end end -->> gLua 3. parti Razer Tarzı Mouseleri desteklemek icin kullaniliyor dofile( [[D:\gLua.lua]] ) EnableThirdPartyMouseEvents() EnableKeyboardKeyEvents()
gLua.lua:
Kod:-->>> gLua Script v.1002 <<<-- --(c)reated 2014 by UPIA - based on guru kgobers' Poll and Task Engine @ forums.logitech.com gLua = {} gLua.PollFamily = "mouse" gLua.PollInterval = 10 gLua.PollDeadtime = 100 gLua.PollRunning = true gLua.PollCheckTime = false gLua.LegalMbKeys = {1,2,3,4,5} gLua.LegalFamilies = {"mouse", "kb", "lhc"} gLua.LegalKBKeys = {"scrolllock", "capslock", "numlock", "lalt", "ralt", "alt", "lshift", "rshift", "shift", "lctrl", "rctrl", "ctrl"} gLua.SetupKBKeys = {"scrolllock", "capslock", "numlock", "lalt", "ralt", "lshift", "rshift", "lctrl", "rctrl"} gLua.KeyCatch = {} gLua.KeyEvent = false gLua.MbCatch = {} gLua.MbEvent = false gLua.MbSwitch23 = false gLua.EventFunction = false gLua.EventFunctionAsTask = false gLua.TaskEngine = false gLua.TaskPrecision = false gLua.OnPollEventStatus = false gLua.OnMouseEventStatus = false gLua.OnGKeyEventStatus = false gLua.OnMKeyEventStatus = false gLua.OnKeyEventStatus = false gLua.LogEM = false gLua.Sleep = Sleep gLua.IsMouseButtonPressed = IsMouseButtonPressed gLua.PressMouseButton = PressMouseButton gLua.ReleaseMouseButton = ReleaseMouseButton gLua.PressAndReleaseMouseButton = PressAndReleaseMouseButton gLua.PollGmksHook = GetMKeyState gLua.PollSmksHook = SetMKeyState gLua.OnEvent = OnEvent --gLua.Runtime = 0 gLua.Down = {} gLua.TaskList = {} gLua.TaskActive = false function EnablePollTimeCheck(bool) bool = bool or true if bool ~= false and bool ~= true then gLua.log("WARNING: EnablePollTimeCheck() - bad parameter '" .. tostring(bool) .. "' ") return false else gLua.PollCheckTime = bool end end function EnableTaskEngine(bool) bool = bool or true if bool ~= false and bool ~= true then gLua.log("WARNING: EnableTaskEngine() - bad parameter '" .. tostring(bool) .. "' ") return false else gLua.TaskEngine = bool if gLua.TaskEngine then TaskRun = gLua.TaskRun TaskAbort = gLua.TaskAbort TaskAbortAll = gLua.TaskAbortAll TaskSleep = gLua.TaskSleep RunTask = gLua.TaskRun AbortTask = gLua.TaskAbort end return true end end function EnableTaskPrecision(bool) bool = bool or true if bool ~= false and bool ~= true then gLua.log("WARNING: EnableTaskPrecision() - bad parameter '" .. tostring(bool) .. "' ") return false else gLua.TaskPrecision = bool return true end end function EnableCustomPolling(family, interval) family = string.lower(family) or "" interval = interval or 10 if gLua.TableFind(gLua.LegalFamilies, family, "ipairs") == 0 then gLua.log("WARNING: EnableCustomPolling() - bad family '" .. family .. "' ignored") return false end if interval < 10 then gLua.log("WARNING: EnableCustomPolling() - interval '" .. interval .. "' too short, set to 10ms" ) interval = 10 end gLua.PollFamily = family gLua.PollInterval = interval return true end function EnableKeyboardKeyEvents(...) gLua.KeyCatch = {} if # arg == 0 or arg[1] == true then arg = gLua.SetupKBKeys elseif arg[1] == false then return true end for i,v in ipairs(arg) do v = string.lower(v) if gLua.TableFind(gLua.LegalKBKeys, v, "ipairs") > 0 then table.insert(gLua.KeyCatch, v) else gLua.log("WARNING: EnableKeyboardKeyEvents() - bad key '" .. v .. "' ignored" ) end end if # gLua.KeyCatch > 0 then gLua.KeyEvent = true end return true end function EnableThirdPartyMouseEvents(...) gLua.MbCatch = {} if # arg == 0 or arg[1] == true then arg = gLua.LegalMbKeys elseif arg[1] == false then return true end for i,v in ipairs(arg) do v = tonumber(v) if gLua.TableFind(gLua.LegalMbKeys, v, "ipairs") > 0 then table.insert(gLua.MbCatch, v) else gLua.log("WARNING: EnableThirdPartyMouseEvents() - bad button '" .. v .. "' ignored" ) end end if # gLua.MbCatch > 0 then gLua.MbEvent = true end return true end function EnableEventFunctions(bool, tasktyp) bool = bool or true tasktyp = tasktyp or false if bool ~= false and bool ~= true then gLua.log("WARNING: EnableEventFunctions() - bad parameter 1 '" .. tostring(bool) .. "' ") return false end if tasktyp ~= false and tasktyp ~= true then gLua.log("WARNING: EnableEventFunctions() - bad parameter 2 '" .. tostring(tasktyp) .. "' ") return false end gLua.EventFunction = bool gLua.EventFunctionAsTask = tasktyp return true end function EnableMouseButton23Switch(bool) bool = bool or true if bool ~= false and bool ~= true then gLua.log("WARNING: EnableMouseButton23Switch() - bad parameter '" .. tostring(bool) .. "' ") return false else gLua.MbSwitch23 = bool if gLua.MbSwitch23 then IsMouseButtonPressed = function(mb) return gLua.IsMouseButtonPressed( gLua.MbSwitch(mb) ) end PressMouseButton = function(mb) gLua.PressMouseButton( gLua.MbSwitch(mb) ) end ReleaseMouseButton = function(mb) gLua.ReleaseMouseButton( gLua.MbSwitch(mb) ) end PressAndReleaseMouseButton = function(mb) gLua.PressAndReleaseMouseButton( gLua.MbSwitch(mb) ) end end return true end end function gLua.log(str) OutputLogMessage(str .. "\n") end function gLua.OnXEventSetStatus() if type(_G["OnPollEvent"]) == "function" then gLua.OnPollEventStatus = true end if type(_G["OnMouseEvent"]) == "function" then gLua.OnMouseEventStatus = true end if type(_G["OnGKeyEvent"]) == "function" then gLua.OnGKeyEventStatus = true end if type(_G["OnMKeyEvent"]) == "function" then gLua.OnMKeyEventStatus = true end if type(_G["OnKeyEvent"]) == "function" then gLua.OnKeyEventStatus = true end end function gLua.OnXEventExecute(event, arg, family) if gLua.OnPollEventStatus and event == "POLL" then _G["OnPollEvent"](event, arg, family) end if gLua.OnMouseEventStatus and ( event == "MOUSE_BUTTON_PRESSED" or event == "MOUSE_BUTTON_RELEASED" ) then _G["OnMouseEvent"](event, arg, family) end if gLua.OnGKeyEventStatus and ( event == "G_PRESSED" or event == "G_RELEASED" ) then _G["OnGKeyEvent"](event, arg, family) end if gLua.OnMKeyEventStatus and ( event == "M_PRESSED" or event == "M_RELEASED" ) then _G["OnMKeyEvent"](event, arg, family) end if gLua.OnKeyEventStatus and ( event == "K_PRESSED" or event == "K_RELEASED" ) then _G["OnKeyEvent"](event, arg, family) end end OnEvent = function(event, arg, family) family = family or "" local st = gLua.PollStateTimer gLua.Runtime = GetRunningTime() if event == "PROFILE_ACTIVATED" then gLua.E = "PA" gLua.EM = "K0L0_PA" gLua.KeyInitiateLocks() gLua.MKeyInitiateID() gLua.OnXEventSetStatus() --if not gLua.TaskEngine then gLua.TaskPrecision = false end gLua.PollStart() elseif event == "PROFILE_DEACTIVATED" then gLua.E = "PD" gLua.EM = "K0L0_PD" else gLua.EventCreateID(event,arg,family) gLua.MKeyCreateID(event,arg,family) end gLua.OnEventExecute(event, arg, family) gLua.KeyGetAll() gLua.MbGetAll() if gLua.TaskEngine then gLua.TaskCheck() end gLua.Poll(event, arg, family, st) end function gLua.OnEventExecute(event, arg, family) if gLua.E ~= "" then if gLua.LogEM then gLua.log(gLua.EM) end gLua.OnXEventExecute(event,arg,family) if gLua.EventFunction then -- run as task local n00 = "K0L0_" .. gLua.E if type(_G[n00]) == "function" then if gLua.EventFunctionAsTask then gLua.TaskRun(n00, _G[n00], event, arg, family) else _G[n00]() end end local nx0 = "K" .. gLua.MK .. "L0_" .. gLua.E if type(_G[nx0]) == "function" then if gLua.EventFunctionAsTask then gLua.TaskRun(nx0, _G[nx0], event, arg, family) else _G[nx0]() end end local n0x = "K0L" .. gLua.ML .. "_" .. gLua.E if type(_G[n0x]) == "function" then if gLua.EventFunctionAsTask then gLua.TaskRun(n0x, _G[n0x], event, arg, family) else _G[n0x]() end end local nxx = "K" .. gLua.MK .. "L" .. gLua.ML .. "_" .. gLua.E if type(_G[nxx]) == "function" then if gLua.EventFunctionAsTask then gLua.TaskRun(nxx, _G[nxx], event, arg, family) else _G[nxx]() end end else gLua.OnEvent(event, arg, family) end end end function gLua.TableFind(array, search, typ) -- Find element in 1D Array typ = typ or "ipairs" local ret = 0 if typ == "ipairs" then for i,v in ipairs(array) do if v == search then ret = i break end end else for i,v in pairs(array) do if v == search then ret = tostring(i) break end end end return ret end function gLua.MKeyInitiateID() gLua.MK = gLua.PollGmksHook("kb") gLua.ML = gLua.PollGmksHook("lhc") end function gLua.MKeyCreateID(e, a, f) if e == "M_PRESSED" then if f == "kb" then gLua.MK = a elseif f == "lhc" then gLua.ML = a end end end function gLua.EventCreateID(e, a, f) local id = "" if f == "mouse" then id = id .. "M" if e == "MOUSE_BUTTON_PRESSED" then id = id .. "pG" .. a gLua.Down[id] = true elseif e == "MOUSE_BUTTON_RELEASED" then gLua.Down[id .. "pG" .. a] = false id = id .. "rG" .. a else id = "" end else local key = string.sub(e, 1, 1) local typ = string.sub(e, 3, 3) if key == "G" or key == "M" then if f == "lhc" then id = id .. "L" elseif f == "kb" then id = id .. "K" end if typ == "P" then id = id .. "p" .. key .. a gLua.Down[id] = true elseif typ == "R" then gLua.Down[id .. "p" .. key .. a] = false id = id .. "r" .. key .. a end end end gLua.E = id gLua.EM = "K" .. gLua.MK .. "L" .. gLua.ML .. "_" .. gLua.E end function gLua.KeyGetAll() for i,v in pairs(gLua.KeyCatch) do gLua.E = "" local CurrDown = gLua.Down[v] if v == "scrolllock" or v == "capslock" or v == "numlock" then if IsKeyLockOn(v) then gLua.Down[v] = true if not CurrDown then gLua.E = "K" .. "p" .. string.upper(v) gLua.EM = "K" .. gLua.MK .. "L" .. gLua.ML .. "_" .. gLua.E if gLua.KeyEvent then gLua.OnEventExecute("K_PRESSED", v, "kb") end end else gLua.Down[v] = false if CurrDown then gLua.E = "K" .. "r" .. string.upper(v) gLua.EM = "K" .. gLua.MK .. "L" .. gLua.ML .. "_" .. gLua.E if gLua.KeyEvent then gLua.OnEventExecute("K_RELEASED", v, "kb") end end end else if IsModifierPressed(v) then gLua.Down[v] = true if not CurrDown then gLua.E = "K" .. "p" .. string.upper(v) gLua.EM = "K" .. gLua.MK .. "L" .. gLua.ML .. "_" .. gLua.E if gLua.KeyEvent then gLua.OnEventExecute("K_PRESSED", v, "kb") end end else gLua.Down[v] = false if CurrDown then gLua.E = "K" .. "r" .. string.upper(v) gLua.EM = "K" .. gLua.MK .. "L" .. gLua.ML .. "_" .. gLua.E if gLua.KeyEvent then gLua.OnEventExecute("K_RELEASED", v, "kb") end end end end end end function gLua.KeyInitiateLocks() local locks = {"scrolllock", "capslock", "numlock"} for i = 1, # locks do if gLua.TableFind(gLua.KeyCatch, locks[i], "ipairs") > 0 then if IsKeyLockOn( locks[i] ) then gLua.Down[ locks[i] ] = true end end end end function gLua.MbGetAll() for i,v in pairs(gLua.MbCatch) do --v = gLua.MbSwitch(v) gLua.E = "" local CurrDown = gLua.Down["MpG" .. v] if IsMouseButtonPressed(v) then gLua.Down["MpG" .. v] = true if not CurrDown then gLua.E = "MpG" .. v gLua.EM = "K" .. gLua.MK .. "L" .. gLua.ML .. "_" .. gLua.E if gLua.MbEvent then gLua.OnEventExecute("MOUSE_BUTTON_PRESSED", v, "mouse") end end else gLua.Down["MpG" .. v] = false if CurrDown then gLua.E = "MrG" .. v gLua.EM = "K" .. gLua.MK .. "L" .. gLua.ML .. "_" .. gLua.E if gLua.MbEvent then gLua.OnEventExecute("MOUSE_BUTTON_RELEASED", v, "mouse") end end end end end function gLua.MbSwitch(mb) if gLua.MbSwitch23 then if mb == 2 then return 3 elseif mb == 3 then return 2 else return mb end else return mb end end ---------------------------------->> Poll Stuff @kgober --> function gLua.PollStart() gLua.PollActiveState = gLua.PollGmksHook(gLua.PollFamily) gLua.PollSmksHook(gLua.PollActiveState, gLua.PollFamily) end function gLua.PollStop() gLua.PollRunning = false end function gLua.Poll(event, arg, family, st) if gLua.PollRunning then if st == nil and gLua.PollStateTimer ~= nil then return end local t = GetRunningTime() if family == gLua.PollFamily then if event == "M_PRESSED" and arg ~= ActiveState then if gLua.PollStateTimer ~= nil and t >= gLua.PollStateTimer then gLua.PollStateTimer = nil end if gLua.PollStateTimer == nil then gLua.PollActiveState = arg end gLua.PollStateTimer = t + gLua.PollDeadtime elseif event == "M_RELEASED" and arg == gLua.PollActiveState then gLua.OnXEventExecute("POLL", 0, "") if gLua.TaskEngine and gLua.TaskPrecision and gLua.TaskNext then gLua.TaskNextLeft = gLua.PollInterval while gLua.TaskNext do if gLua.TaskNext < gLua.TaskNextLeft then Sleep(gLua.TaskNext) gLua.TaskNextLeft = gLua.TaskNextLeft - gLua.TaskNext gLua.TaskCheck() else break end end Sleep(gLua.TaskNextLeft) gLua.PollSmksHook(gLua.PollActiveState, gLua.PollFamily) else if gLua.PollCheckTime then local Tcheck = GetRunningTime() Sleep(gLua.PollInterval) Tcheck = GetRunningTime() - Tcheck if (Tcheck == 15 or Tcheck == 16) and (gLua.PollInterval ~= 15 and gLua.PollInterval ~= 16) then if type(_G["PollCheckAlert"]) == "function" then PollCheckAlert(Tcheck) end else if type(_G["PollCheckAlert"]) == "function" then PollCheckAlert(-1) end end else Sleep(gLua.PollInterval) end gLua.PollSmksHook(gLua.PollActiveState, gLua.PollFamily) end end end end end GetMKeyState = function(family) family = family or "kb" if family == gLua.PollFamily then return gLua.PollActiveState else return gLua.PollGmksHook(family) end end SetMKeyState = function(mkey, family) family = family or "kb" if family == gLua.PollFamily then if mkey == gLua.PollActiveState then return end gLua.PollActiveState = mkey gLua.PollStateTimer = GetRunningTime() + gLua.PollDeadtime end return gLua.PollSmksHook(mkey, family) end ---------------------------------->> Task Management functions @kgober --> function gLua.TaskCheck() local t = GetRunningTime() if gLua.TaskPrecision then gLua.TaskNext = false local next = gLua.PollInterval for key, task in pairs(gLua.TaskList) do local n = task.time - t if t >= task.time then gLua.TaskActive = key local s, d = coroutine.resume(task.task, task.run) --, task.key) gLua.TaskActive = false if (not s) or ((d or -1) < 0) then gLua.TaskList[key] = nil else task.time = task.time + d end else if n < next then gLua.TaskNext = n end end end else for key, task in pairs(gLua.TaskList) do if t >= task.time then gLua.TaskActive = key local s, d = coroutine.resume(task.task, task.run) --, task.key) gLua.TaskActive = false if (not s) or ((d or -1) < 0) then gLua.TaskList[key] = nil else task.time = task.time + d end end end end end function gLua.TaskRun(key, func, ...) gLua.TaskAbort(key) local task = {} task.time = GetRunningTime() task.task = coroutine.create(func) task.run = true gLua.TaskActive = key local s, d = coroutine.resume(task.task, ...) gLua.TaskActive = false if (s) and ((d or -1) >= 0) then task.time = task.time + d gLua.TaskList[key] = task end end function gLua.TaskStop(key) local task = gLua.TaskList[key] if task ~= nil then task.run = false end end function gLua.TaskAbort(key) local task = gLua.TaskList[key] if task == nil then return end while true do local s, d = coroutine.resume(task.task, false) if (not s) or ((d or -1) < 0) then gLua.TaskList[key] = nil return end end end function gLua.TaskAbortAll() gLua.TaskList={} end function gLua.TaskRunning(key) local task = gLua.TaskList[key] if task == nil then return false end return task.run end function gLua.TaskSleep(delay) return coroutine.yield(delay) end OutputLogMessage("gLua.Library loaded!\n") --eof (end of file)
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?