- Yasaklandı
- #1
Banlı Üye
Greetings friends, this topic is valid for those who pass van152 and eat val5. If many of you believe that programs like "Volume ID Changer" that you use work in vanguard, you are wrong. After spoofing, when I installed my new ssd, I noticed that I didn't get val5 for 5 days. The day I plugged in the old ssdmi, I ate val5 in 3 hours. Usually val5's are caused by the disk id not changing. The location is yours. Raid arrays etc. in the subject. I will show you how to set it up.
For AMD Systems (Raidxpert2)
Before starting the operations, when you open a raid and create an array, I state that every piece of information in your disk will be deleted, and I will not take any responsibility.
[FOR ASUS MOTHERBOARDS]
First of all, flash a latest version uefi format and flash your raid drivers (your driver should have rcbottom, rccfg, rcraid folders).
After opening them, we reboot the system. We enter the bios again.
(IF YOU HAVE ONLY ONE DISK, MAKE A VOLUME, IF YOU HAVE TWO DISKS WITH THE SAME PROPERTIES (IN SIZE), CHOOSE RAID0. DO NOT USE RAID1 OR RAID10!)
Add the disks to be added to the raid from here and finish. Then boot usb from F8 menu. When you come to the format section, it will not see your discs.
Click on install driver and do the following:
1- Install your driver in your folder named RCBOTTOM.
2- Install your driver in the folder named RcRaid. (ATTENTION, YOUR DISK WILL COME WHEN YOU INSTALL THE DRIVER, DO NOT INSTALL)
3-Install the 3rd driver from your RCcfg folder.
4- Say Next and install the format.
If there is no brand in Device Manager, if raid is visible, you are done. Do your spoofing and have fun without buying a VAL5!
Friends, I tried the raid method myself, when you exit the raid and return to your ssd, you get a ban within a maximum of 1 day. I've been experimenting on these issues for a full month. After spoofing (amidewin afuwin), it doesn't matter if you still get val5, change the mac address
For AMD Systems (Raidxpert2)
Before starting the operations, when you open a raid and create an array, I state that every piece of information in your disk will be deleted, and I will not take any responsibility.
[FOR ASUS MOTHERBOARDS]
First of all, flash a latest version uefi format and flash your raid drivers (your driver should have rcbottom, rccfg, rcraid folders).
After opening them, we reboot the system. We enter the bios again.
(IF YOU HAVE ONLY ONE DISK, MAKE A VOLUME, IF YOU HAVE TWO DISKS WITH THE SAME PROPERTIES (IN SIZE), CHOOSE RAID0. DO NOT USE RAID1 OR RAID10!)
Add the disks to be added to the raid from here and finish. Then boot usb from F8 menu. When you come to the format section, it will not see your discs.
Click on install driver and do the following:
1- Install your driver in your folder named RCBOTTOM.
2- Install your driver in the folder named RcRaid. (ATTENTION, YOUR DISK WILL COME WHEN YOU INSTALL THE DRIVER, DO NOT INSTALL)
3-Install the 3rd driver from your RCcfg folder.
4- Say Next and install the format.
If there is no brand in Device Manager, if raid is visible, you are done. Do your spoofing and have fun without buying a VAL5!
Friends, I tried the raid method myself, when you exit the raid and return to your ssd, you get a ban within a maximum of 1 day. I've been experimenting on these issues for a full month. After spoofing (amidewin afuwin), it doesn't matter if you still get val5, change the mac address
